Ariens 921045 User Manual

Loading ...

EN – 35

See Figure 78.

6. Rotate cam so flat edge is positioned upward and

secure with spring clip.

7. Reconnect spring to interlock bracket.

8. Check dual-handle interlock function. Refer to

Operator’s Manual for test procedure.

IMPORTANT: If dual-handle interlock continues to

malfunction, see your Ariens dealer.

AXLE BUSHING REPLACEMENT

Remove Left Axle Bushing

IMPORTANT: Save all hardware for reinstallation.

1. Stop engine, remove key and wait for all moving parts

to stop and for hot parts to cool.

2. Disconnect spark plug wire from engine.

3. Place unit in service position and remove bottom

cover. See Service Position on page 7 and Bottom

Cover Removal on page 12.

4. Remove snap clips from left axle end and remove

wheel.

See Figure 79.

5. Remove key and flat steel washer from axle.

6. Remove hardware securing axle bushing to frame and

remove bushing.

Install Left Axle Bushing

1. Install bushing onto axle and secure to frame with

three tapping screws from inside frame.

2. Reinstall flat steel washer and key onto axle.

3. Reinstall bottom cover and secure with two tapping

screws and four hex bolts.

4. Reinstall wheel and secure with snap clip.

5. Return unit to operating position.

6. Reconnect spark plug wire and fill fuel tank.

Figure 78

Models 921045, 921046, 921048

Models 921047, 921049, 921323, 921324,

921325, 921326

WARNING: AVOID INJURY. Before placing unit

in service position, drain fuel from tank and fuel

system. See Draining Fuel System on page 7.

Make sure unit is secure and will not tip.

Figure 79

Loading ...

Ariens 921045 Deluxe 24 24-in 254-cc Two Self-Propelled Gas Snow Blower