Loading ...
Loading ...
Loading ...
EN – 21
See Figure 38.
7. Disconnect traction drive clutch cable and return
spring from swing gate.
IMPORTANT: To gain more cable slack, traction drive
clutch cable may need to be removed from traction clutch
lever. See Figure 69.
8. Remove three hairpins and one flat steel washer from
pivot rod and remove pivot rod. See Figure 39.
9. Remove swing gate assembly. See Figure 40.
Install Swing Gate Assembly
1. Position swing gate assembly inside frame and align
with pivot rod holes.
2. Reinstall pivot rod through swing gate and secure with
one flat steel washer and three hairpins. See
Figure 41.
3. Reconnect traction drive clutch cable and return
spring to swing gate. See Figure 42.
Figure 38
1. Traction Drive Clutch Cable
2. Return Spring
1
2
Figure 39
WARNING: AVOID INJURY. Wear thick gloves;
traction drive pulley and engine sheave edges
are sharp.
Figure 40
Figure 41
Loading ...
Loading ...
Loading ...