Loading ...
Loading ...
Loading ...
EN – 14
TRACTION DRIVE BELT
REPLACEMENT
Remove Traction Drive Belt
IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Remove belt cover and belt finger as shown in
Figure 8 and Figure 9.
4. Slowly pull recoil starter handle while gently guiding
attachment belts off engine sheave. See Figure 19.
To assist belt removal, slowly pull recoil starter handle
while gently guiding belts out of attachment sheave.
5. Loosen traction drive clutch cable. See Figure 20.
See Figure 21.
6. Disconnect idler spring from traction idler arm.
7. Remove stop bolt from frame.
See Figure 22.
8. Rotate traction idler arm away from belt and rotate
swing gate assembly forward.
9. Remove belt.
Figure 19
Figure 20
Figure 21
1. Idler Spring
2. Traction Idler Arm
3. Stop Bolt
1
2
3
Figure 22
Loading ...
Loading ...
Loading ...