Loading ...
Loading ...
Loading ...
EN – 19
Install Friction Disc
1. Install friction disc assembly around shift fork roller
bearing and align with hex shaft. See Figure 33.
2. Reinstall hex shaft through friction disc, pinion
sprocket and into frame. See Figure 34.
See Figure 35.
3. Reinstall spring clips into hex shaft.
4. Reinstall bearing onto hex shaft end.
5. Reinstall bearing flange over bearing and secure to
frame with three tapping screws.
6. Reinstall adjustment pivot pin onto shift arm and
secure with hairpin.
7. Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
8. Reinstall wheels onto axle and secure with snap clips.
9. Return unit to operating position.
10. Fill fuel tank and reconnect spark plug wire.
11. Adjust speed selector lever. Refer to Operator’s
Manual for adjustment procedure.
IMPORTANT: Check all adjustments after first use.
Figure 33
Figure 34
Figure 35
Loading ...
Loading ...
Loading ...