Loading ...
Loading ...
Loading ...
EN – 47
Install Bulb
NOTICE: DO NOT touch new bulb with bare hands; wear
gloves. Body oil on a headlight bulb can increase bulb
temperature and reduce life of the bulb.
1. Install bulb into headlight housing and turn one-eighth
turn clockwise.
2. Connect bulb to wire harness.
3. Reinstall headlight housing into dash panel and
secure with two tapping screws.
IMPORTANT: Reconnect spark plug wire.
GEARCASE REBUILD
Disassemble Gearcase
IMPORTANT: Save all parts for reassembly, unless
otherwise specified.
1. Remove gearcase. See Remove Gearcase Assembly
on page 26.
2. Remove any rust, if present, from auger and impeller
shafts with sandpaper. Wipe clean with oil.
3. Remove drain plug and seal washer from gearcase.
See Figure 113.
Figure 112
Figure 113
Loading ...
Loading ...
Loading ...