Loading ...
Loading ...
Loading ...
EN ā 29
See Figure 64.
7. Remove hardware securing engine mount to frame.
8. Remove J-clamp and chute deflector cable from
engine mount.
9. Using a suitable lifting device or help from an adult
assistant, lift engine and tilt forward slightly to relieve
tension from belts. Remove belts from engine
sheaves.
10. Lower engine onto a flat, level surface.
See Figure 65.
11. Remove hardware securing attachment sheave to
crankshaft.
12. Remove attachment sheave, traction sheave and
nylon washer from crankshaft.
Install Engine
1. Using a suitable lifting device or help from an adult
assistant, lift engine and lower onto bolts in frame.
2. Position belts over crankshaft.
3. Reinstall J-clamp to left rear engine mounting position.
4. Secure engine mount to frame with four locking nuts.
Torque to 11.9 ā 17.9 Nā¢m (8.8 ā 13.2 lb-ft).
See Figure 66.
5. Reinstall traction sheave onto crankshaft.
6. Reinstall traction drive belt onto traction sheave.
7. Reinstall attachment sheave onto crankshaft.
IMPORTANT: Traction sheave must be reinstalled in the
orientation shown in Figure 66.
WARNING: AVOID INJURY. Engine is heavy.
NEVER lift engine without a suitable lifting device
or adult assistant.
Figure 64
Figure 65
WARNING: AVOID INJURY. Engine is heavy.
NEVER lift engine without a suitable lifting device
or adult assistant.
Figure 66
Loading ...
Loading ...
Loading ...