Loading ...
Loading ...
Loading ...
TruSwing
™
Your device is compatible with the TruSwing sensor. You can
use the TruSwing app on your watch to view swing metrics
recorded from your TruSwing sensor. See the owner's manual
for your TruSwing sensor for more informationwww.garmin.com
/manuals/truswing.
Using the Golf Odometer
You can use the odometer to record the time, distance, and
steps traveled. The odometer automatically starts and stops
when you start or end a round.
1
From the hole information screen, press START.
2
Select Odometer.
3
If necessary, select Reset to reset the odometer to zero.
Viewing PlaysLike Distance
The "plays like" distance feature accounts for elevation changes
on the course by showing the adjusted distance to the green.
1
From the hole information screen, hold MENU.
2
Select the activity settings.
3
Select PlaysLike.
An icon appears next to each distance.
Distance plays longer than expected due to a change in
elevation.
Distance plays as expected.
Distance plays shorter than expected due to a change in
elevation.
Viewing the Direction to the Pin
The PinPointer feature is a compass that provides directional
assistance when you are unable to see the green. This feature
can help you line up a shot even if you are in the woods or in a
deep sand trap.
NOTE: Do not use the PinPointer feature while in a golf cart.
Interference from the golf cart can affect the accuracy of the
compass.
1
From the hole information screen, press START.
2
Select PinPointer.
The arrow points to the pin location.
Viewing Club Statistics
Before you can view your club statistics, such as distance and
accuracy information, you must either pair the device with
Approach
®
CT10 golf club sensors (Club Sensors, page 41), or
enable the Club Prompt setting (Activities and App Settings,
page 31).
1
While playing golf, press START.
2
Select Club Stats.
3
Select a club.
Climbing Sports
Recording an Indoor Climbing Activity
You can record routes during an indoor climbing activity. A route
is a climbing path along an indoor rock wall.
1
From the watch face, press START.
2
Select Climb Indoor.
3
Select Yes to record route statistics.
4
Select a grading system.
NOTE: The next time you start an indoor climbing activity, the
device uses this grading system. You can hold MENU, select
the activity settings, and select Grading System to change
the system.
5
Select the difficulty level for the route.
6
Press START.
7
Start your first route.
NOTE: When the route timer is running, the device
automatically locks the buttons to prevent accidental button
presses. You can hold any button to unlock the watch.
8
When you finish the route, descend to the ground.
The rest timer starts automatically when you are on the
ground.
NOTE: If necessary, you can press LAP to finish the route.
9
Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
10
Enter the number of falls for the route.
11
When you are done resting, begin your next route.
12
Repeat this process for each route until your activity is
complete.
13
Press STOP.
14
Select Save.
Recording a Bouldering Activity
You can record routes during a bouldering activity. A route is a
climbing path along a boulder or small rock formation.
1
From the watch face, press START.
2
Select Bouldering.
3
Select a grading system.
NOTE: The next time you start a bouldering activity, the
device uses this grading system. You can hold MENU, select
the activity settings, and select Grading System to change
the system.
4
Select the difficulty level for the route.
5
Press START to start the route timer.
6
Start your first route.
7
Press LAP to finish the route.
8
Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
The rest timer appears.
9
When you are done resting, press LAP to start your next
route.
10
Repeat this process for each route until your activity is
complete.
11
After your last route, press STOP to stop the route timer.
12
Select Save.
Connected Features
Connected features are available for your MARQ device when
you connect the device to a compatible smartphone using
Bluetooth technology. Some features require you to install the
Garmin Connect app on the connected smartphone. Go to
www.garmin.com/apps for more information. Some features are
also available when you connect your device to a wireless
network.
Phone notifications: Displays phone notifications and
messages on your MARQ device.
LiveTrack: Allows friends and family to follow your races and
training activities in real time. You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.
8 Connected Features
Loading ...
Loading ...
Loading ...