Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 85
To change the rear system settings:
Press the "Rear Climate" button on the touch-
screen to display the rear climate controls.
The control functions now operate the rear
system.
Press the “Front Climate” button on the
touchscreen to return to the front climate
controls.
Rear Climate Control Button
Press and release this button to
access the rear climate controls. The
indicator will illuminate when the rear
climate controls are on.
Rear Lock Button
Press and release this button to lock
out the rear manual temperature
controls from adjusting the rear
temperature and blower settings.
Front Climate Button
Press and release this button to
change the display on the Uconnect
system back to the Front Climate
Controls.
Rear Temperature Control
These buttons provide the rear passengers with
independent temperature control.
Push the up arrow button on the
touchscreen to increase the
temperature.
Push the down arrow button on the
touchscreen to decrease the
temperature.
NOTE:
When the SYNC feature is active, the
passenger’s temperature moves up and down
with the driver’s temperature.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator is
illuminated when this feature is
enabled. SYNC is used to synchronize the front
and rear passenger temperature settings with
the driver temperature setting. Changing the
front or rear passenger temperature setting
while in SYNC exits this feature.
NOTE:
The SYNC setting is only available on the touch-
screen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the
Climate Control system. There are
seven blower speeds available.
Adjusting the blower causes automatic mode to
switch to manual operation. The speeds can be
selected using the buttons on the touchscreen.
Panel Mode
Press this button on the touchscreen
to change the air distribution mode to
Panel Mode. In Panel Mode, air
comes from the outlets in the
headliner. Each of these outlets can be
individually adjusted to direct the flow of air.
Moving the air vanes of the outlets to one side
will shut off the airflow.
2
21_RUP_OM_EN_USC_t.book Page 85
Loading ...
Loading ...
Loading ...