Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 83
Front Temperature Control
These buttons provide the driver and passenger
with independent temperature control.
Push the red button on the faceplate
or touchscreen or press and slide the
temperature bar towards the red
arrow button on the touchscreen for
warmer temperature settings.
Push the blue button on the faceplate
or touchscreen or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
SYNC Button
Press the SYNC button on the
touchscreen to toggle the Sync
feature on/off. The SYNC indicator is
illuminated when this feature is
enabled. SYNC is used to synchronize the front
and rear passenger temperature settings with
the driver temperature setting. Changing the
front or rear passenger temperature setting
while in SYNC will automatically exit this
feature. Pressing SYNC on the touchscreen
while in the Front Climate screen synchronizes
the driver and passenger temperatures only. In
order to SYNC rear temperature to driver
temperature, the touchscreen must be on the
Rear Climate screen.
NOTE:
The SYNC setting is only available on the touch-
screen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the
Climate Control system. There are
seven blower speeds available. The
speeds can be selected using either the blower
control knob on the faceplate or the buttons on
the touchscreen.
Faceplate: The blower speed increases as
you turn the blower control knob clockwise
from the lowest blower setting. The blower
speed decreases as you turn the blower
control knob counterclockwise.
Touchscreen: Use the small blower icon to
reduce the blower setting and the large
blower icon to increase the blower setting.
Blower speed can also be selected by
pressing the blower bar area between the
icons.
Mode Control
The airflow distribution mode can be
adjusted so air comes from the
instrument panel outlets, floor outlets,
defrost outlets and demist outlets.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
2
21_RUP_OM_EN_USC_t.book Page 83
Loading ...
Loading ...
Loading ...