Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 113
Hose Access Port
The hose access port is located behind the
access panel behind the third row seat on the
driver’s side.
To Remove Vacuum Hose For Cleaning
1. Open the access panel.
Vacuum System Access Panel
2. Open the small access panel on the upper
right side, and unclip the hose from the
hose access port by pushing the yellow
vacuum hose release lever with right thumb
and lifting the hose with index finger.
Vacuum Hose Release Lever
3. Return to vacuum nozzle storage location
located behind the sliding door.
4. Grab the vacuum nozzle and gently pull the
hose out through vacuum nozzle storage
location.
5. Shake the hose to remove any objects stuck
in the hose. Take care not to perforate the
hose while attempting to dislodge any
objects.
6. Reverse the procedure to reinstall and clip
the hose into place.
STOW ‘N PLACE ROOF RACK — IF EQUIPPED
The crossbars and side rails are designed to
carry weight on vehicles equipped with a
luggage rack. The load must not exceed 150 lb
(68 kg), and should be uniformly distributed
over the luggage rack crossbars.
The crossbars on your vehicle are delivered
stowed within the roof rack side rails. Crossbars
should always be used whenever cargo is
placed on the roof rack. Check the straps
frequently to be sure that the load remains
securely attached.
Roof Rack
1 — Side Rail
2 — Crossbar
2
21_RUP_OM_EN_USC_t.book Page 113
Loading ...
Loading ...
Loading ...