Loading ...
Loading ...
Loading ...
112 GETTING TO KNOW YOUR VEHICLE
Vacuum Troubleshooting
DO NOT use with any opening blocked. If an
object becomes lodged in the hose, attempt
to fully extend the hose in a straight line while
the vacuum motor is running. If this does not
dislodge the object, turn the vacuum OFF and
remove the hose from the vehicle following
the removal instructions below. If the filter is
clogged, follow the emptying debris bin
procedure and lightly tap the filter on the
collection bin to remove any collected debris
from the filter. Both the bin and the filter can
be rinsed with water if needed. To avoid mold
and stale odors, allow both to dry completely
before reinstalling in your vehicle. If the filter
has tears, holes or other damage and needs
to be replaced, please contact an authorized
dealer.
If there are any other issues with your
vacuum, contact an authorized dealer. Your
vacuum has no user serviceable parts.
Debris Bin
The debris bin is located behind the access
panel behind the third row seat on the driver’s
side.
To Empty
1. Push power button to turn vacuum OFF.
2. Open the access panel by pulling the finger
grip towards you and then pull downward.
Vacuum System Access Panel
3. Twist the release knob counterclockwise
and pull the bin towards you.
Debris Bin Release Knob
4. Remove the filter and dump the debris in a
trash can. Lightly tap the filter on the
collection bin to remove loose debris from
the filter. If the filter is clogged from
extended use, have the filter replaced by an
authorized dealer.
5. Reverse the procedure to reinstall.
NOTE:
The debris bin must be fully installed and locked
for the vacuum to function properly.
21_RUP_OM_EN_USC_t.book Page 112
Loading ...
Loading ...
Loading ...