Loading ...
Loading ...
Loading ...
Subframe
36 Servicing Your Honda
Subframe
Refer to Important Safety Precautions on page 23.
Removal
1. Remove the seat (page 33).
2. Remove the right and left mufflers (page 114).
3. Remove the seat support base mounting bolts
(1), washers (2), and collars (3).
4. Disconnect the starter/ignition relay connector
(4) and remove the seat support base (5).
5. Lift the seat support base (5) and hang it to the
left of the subframe (6).
6. Disconnect the breather tube (7) and IAT
sensor connector (8).
7. Loosen the air cleaner connecting tube clamp
screw (9).
8. Disconnect the negative (–) terminal (10) from
the battery (11).
9. Remove the start magnetic switch stay bolt (12)
and plastic wire band (13).
Pull out the start magnetic switch (14).
Remove the start magnetic switch cover (15)
and then disconnect the start magnetic switch
connector (16).
Remove the starter motor terminal bolt (17)
and disconnect the starter motor terminal (18)
from the start magnetic switch.
(1) seat support base
mounting bolts
(4) starter/ignition relay
connector
(2) washers (5) seat support base
(3) collars
(5) seat support base
(6) subframe
(1)
(2)
(3)
(4)
(3)
(2)
(5)
(5)
(6)
(7) breather tube
(8) IAT sensor connector
(9) air cleaner connecting tube clamp screw
(10) negative (–) terminal
(11) battery
(9)
(7)
(8)
(10)
(11)
(12) start magnetic switch stay bolt
(13) wire band
(14) start magnetic switch
(15) start magnetic switch cover
(16) start magnetic switch connector
(17) starter motor terminal bolt
(18) starter motor terminal
(13) (15)
(16)(18)(12)
(14)
(17)
Loading ...
Loading ...
Loading ...