Loading ...
Loading ...
Loading ...
18 Basic Operating Instructions
Starting & Stopping the Engine
Warm Engine Starting
1. Shift the transmission into neutral.
2. (Using the kickstarter)
Kick-start the engine. (Do not open the
throttle.)
(Using the start button)
Pull the clutch lever and depress the start
button. (Do not open the throttle.)
Starting the engine excessively changed with fuel
by throttle blipping or other reasons
1. Shift the transmission into neutral.
2. (Using the kickstarter)
With the throttle fully opened, repeat
kickstarter operation approximately 2 or 3
times to discharge excessive fuel from the
engine.
(Using the start button)
With the throttle fully opened, pull the clutch
and depress the start button for 5 seconds to
discharge excessive fuel from the engine.
3. (Using the kickstarter)
Kick-start the engine. (Do not open the
throttle.)
(Using the start button)
Pull the clutch lever and depress the start
button. (Do not open the throttle.)
Snapping the throttle or fast idling for more than
about 5 minutes may cause exhaust pipe and
muffler discolorations.
When starting the engine, the MIL (amber) will
stay on for 2 seconds, then go off. And then the
mode indicator (blue) indicates the current engine
mode for 0.8 seconds, then goes off. If the MIL/
mode indicator does not come on or go off when it
should, have your dealer check it for problems.
Normal Engine Stop
1. Shift the transmission into neutral.
2. Push and hold the engine stop button (1) until
the engine stops completely.
Emergency Engine Stop
To stop the engine in an emergency, push and hold
the engine stop button.
(1) MIL (amber) / mode indicator (blue)
(1)
How to Stop the Engine
(1) engine stop button
(1)
Loading ...
Loading ...
Loading ...