Loading ...
Loading ...
Loading ...
Note
When the F-value is F9.0 or above, Phase Detection AF cannot be used. Only Contrast
AF is available.
Phase Detection AF is available only with compatible lenses. If an incompatible lens is
attached, you will be unable to use Phase Detection AF. Phase Detection AF may not
operate even with some compatible lens, such as lenses purchased in the past that have
not been updated. For details on compatible lenses, visit the Sony web site in your area,
or consult your Sony dealer or local authorized Sony service facility.
When using a Mount Adaptor (sold separately) to attach an A-Mount lens (sold
separately), this product’s Phase Detection AF cannot be used.
When shooting movies, the Phase Detection AF does not operate. The auto-focus points
for the Phase Detection AF will not be displayed.
[85] How to Use
Using shooting functions Adjusting the focus
Measuring the exact distance to the subject
The mark shows the location of the image sensor*. When you measure the exact
distance between the product and the subject, refer to the position of the horizontal line.
The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
*
The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the focus cannot
be confirmed. Make sure you put enough distance between the subject and the product.
[86] How to Use
Using shooting functions Adjusting the exposure
Exposure Comp.
Loading ...
Loading ...
Loading ...