Loading ...
Loading ...
Loading ...
If the battery pack is ejected while the power is set to ON, the camera settings may be
reset. When ejecting the battery pack, first set the power to OFF and check that the
access lamp is not illuminated.
[344] Troubleshooting Troubleshooting Others
The product does not work properly.
Turn off the product. Remove the battery pack and insert it again. If the product is hot,
remove the battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-PW20 AC Adaptor (sold separately) is used, disconnect the power cord.
Connect the power cord and turn on the product again. If the product repeats the same
error often or still does not work after trying these solutions, consult your Sony dealer or
local authorized Sony service facility.
[345] Troubleshooting Troubleshooting Others
“--E-” appears on the screen.
Remove the memory card, and insert it again. If the problem persists even after
performing this procedure, format the memory card.
[346] Troubleshooting Messages Messages
Warning messages
Set Area/Date/Time.
Set the area, date and time. If you have not used the product for a long time, charge the
internal rechargeable backup battery.
Power insufficient.
The image sensor cleaning function will not operate because the remaining battery level
is low. Recharge the battery pack or use the AC Adaptor (sold separately).
Loading ...
Loading ...
Loading ...