Loading ...
Loading ...
Loading ...
Note
Attach the lens hood properly. Otherwise, the lens hood may not have any effect or may
be partially reflected in the image.
When the lens hood is attached properly, the lens hood index (red line) matches the red
index mark on the hood. (There may be no lens hood index on some lenses.)
Remove the lens hood when using the flash. Otherwise, the lens hood blocks the flash
light and may appear as a shadow on the image.
To store the lens hood after shooting, attach the lens hood to the lens backward.
[24] How to Use
Preparing the camera Attaching a lens
Notes on changing the lens
When changing the lens, if dust or debris gets inside the camera and adheres to the surface
of the image sensor (the part that converts the light to an electric signal), it may appear as
dark spots on the image, depending on the shooting environment.
Make sure to attach/remove the lens quickly away from dusty locations.
[25] How to Use Preparing the camera Setting the date and time
Setting the date and time
When you turn on the camera for the first time or after you have initialized the functions, the
setting screen for the date and time appears.
1. Set the power switch to ON to turn on the camera.
The setting screen for the date and time appears.
2. Check that [Enter] is selected on the screen, then press on the control wheel.
3. Select your desired geographic location, and then press .
Loading ...
Loading ...
Loading ...