Loading ...
Loading ...
Loading ...
Select MENU → (Custom Settings) → [Custom Key Settings] → desired button
→ [FEL Lock toggle] to register the function in advance.
3. Adjust the composition and shoot the image.
When you want to release the FEL lock, press the button to which [FEL Lock toggle]
is registered again.
Flashes that support FEL lock
HVL-F60M, HVL-F43M and HVL-F32M can be used as clip-ons, off-camera connected
by a cable, and for wireless flash shooting (controller/remote).
HVL-F20M can be used as a clip-on, off-camera connected with a cable, and for wireless
flash shooting (controller).
Note
The FEL lock cannot be set when a flash is not attached.
If a flash that does not support the FEL lock is attached, an error message is displayed.
When both AE and FEL lock are fixed, flashes.
Hint
By setting [FEL Lock hold], you can hold the setting while the button is pressed down.
Also, by setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.], you can shoot images
with the AE locked in the following situations.
When [Flash Mode] is set to [Flash Off] or [Autoflash].
When the flash cannot go off.
[55] How to Use Using shooting functions Selecting a screen display mode
Switching the screen display (Shooting)
You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes as
follows:
Graphic Display → Display All Info. → No Disp. Info. → Histogram → Level → For
viewfinder* → Graphic Display
Graphic Display
Loading ...
Loading ...
Loading ...