Loading ...
Loading ...
Loading ...
The time code (TC) and the user bit (UB) information can be recorded as data attached to
movies.
1. MENU→ (Setup) → [TC/UB Settings] → setting value you want to change.
Menu item details
TC/UB Disp. Setting:
Sets the display for the counter, time code, and user bit.
TC Preset:
Sets the time code.
UB Preset:
Sets the user bit.
TC Format:
Sets the recording method for the time code.
TC Run:
Sets the count up format for the time code.
TC Make:
Sets the recording format for the time code on the recording medium.
UB Time Rec:
Sets whether or not to record the time as a user bit.
How to set the time code (TC Preset)
1. MENU→ (Setup) → [TC/UB Settings] → [TC Preset], then press in the center
of the control wheel.
2. Turn the control wheel and select the first two digits.
The time code can be set between the following range.
When [60i] is selected: 00:00:00:00 to 23:59:59:29
*
When [24p] is selected, you can select the last two digits of the time code in
multiples of four from 0 to 23 frames.
When [50i] is selected: 00:00:00:00 to 23:59:59:24
3. Set the other digits following the same procedure as in step 2, then press in the
center of the control wheel.
How to reset the time code
Reset the time code using the infrared remote control RMT-845 (sold separately), which is
available at Sony service facilities.
Only the following settings can be changed using the RMT-845. You cannot perform any
other operations.
Loading ...
Loading ...
Loading ...