Loading ...
Loading ...
Loading ...
[Viewfinder Bright.]: [Manual][±0]
[Monitor Brightness]: [Manual][±0]
[Display Quality]: [Standard]
The number for "Shooting (still images)" is based on the CIPA standard, and is for
shooting under the following conditions (CIPA: Camera & Imaging Products Association):
DISP: [Display All Info.]
Focus Mode: [Single-shot AF]
One picture is taken every 30 seconds.
The power is turned on and off once every ten times.
The number of minutes for movie shooting is based on the CIPA standard, and is for
shooting under the following conditions:
The image quality is set to 60i 17M (FH) .
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by,
turning on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has
been reached, and then continued by pressing the MOVIE button again. Other functions, such as
zooming, are not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[17] How to Use
Preparing the camera Charging the battery pack
Supplying power using a wall outlet (wall socket)
Power can be supplied to the camera during shooting/playback using an AC adaptor AC-
PW20 (sold separately).
1. To supply power to the camera during shooting/playback, connect the camera and the
AC adaptor AC-PW20 (sold separately) and plug the AC adaptor to a wall outlet (wall
socket).
Note
You cannot shoot or play back images while the supplied AC adaptor is connected to the
camera. If you want to shoot or play back images with power supplied from a wall outlet
(wall socket), use the AC-PW20 AC Adaptor (sold separately).
[18] How to Use
Preparing the camera Charging the battery pack
Removing the battery pack
Loading ...
Loading ...
Loading ...