Loading ...
Loading ...
Loading ...
2
3
33 34
Assembly - JB & DB
Close the lid and replace the Styrofoam back on top of the
grill. This will prevent scratching of the grill when you flip it.
Align the shelf with the holes located on the inside of the 4
legs. Thread the bolt through the legs into the shelf and secure.
REPLACE THE STYROFOAM & FLIP
UPSIDE DOWN
3
FLIP RIGHT SIDE UP AND REMOVE THE BOX
5
INSTALL THE LEGS
4
Install the legs as shown. The
caster legs should be closest to the
hopper side.
INSTALL THE BOTTOM SHELF
6
First, install the shelf brackets onto the front of the grill.
Place the shelf on top and secure it to the brackets.
INSTALL THE FRONT SHELF
7
HEAT SHIELD SLIDER
The slider brackets are preinstalled
and located along the back and front
side of the inside base of the grill.
HEAT SHIELD
Place the heat shield into the slider
brackets to properly sit over the firebox.
Line it up per the measurements of the
grill models listed below.
DB
4.25”
From
left wall.
JB
9.25”
From
left wall.
INSERT THE INTERNAL PARTS
9
Important: Pour the contents
of the Ziploc bag into the
firebox before you install the
rest of the parts. This is part of
the initial starting procedure.
PRIME THE FIREBOX
8
HOPPER
SIDE
Jim Bowie & Daniel Boone Assembly
Loading ...
Loading ...
Loading ...