Loading ...
Loading ...
Loading ...
Service and maintenance
3-10
3-10
Exhaust Pipe And Muffler
Inspection
Check the muffler for clogging.
Check for loose or missing bolts and nuts.
Check the exhaust pipe and muffler for cracks or
deformation.
Check the exhaust pipe gasket.
Check the muffler gasket.
Loss of power will result if the exhaust pipe is broken.
(1) EXHAUST PIPE
(2) MUFFLER
Clutch System
System Inspection
1. Operate the clutch lever and check that no air has en-
tered in the system. If the clutch is not disengaged
properly, or the lever feels soft or spongy, bleed the air
from the system.
2. Remove the reservoir cover and diaphragm, check the
clutch fluid level. If the level is low, inspect the clutch
hose and fittings for damage, deterioration, cracks or
sign of leakage. Tighten any loose fittings. Replace
hose and fittings as require.
(1) CLUTCH FLUID RESERVOIR
(2) LOWER LEVEL LINE
4. Fill the radiator with coolant up to the filler neck.
5. Squeeze the radiator hoses alternately. If the coolant
level drops, fill the coolant again.
6. Fill the radiator with coolant up to the filler neck.
7. After this first filling, start the engine, check the
coolant level (page 1-2).
(1) FILLER NECK
2
1
1
2
1
Loading ...
Loading ...
Loading ...