Loading ...
Loading ...
Loading ...
Hold the axle holder in a vise protected with a piece of
wood or soft jaws to avoid damage.
Do not overtighten.
Loosen the left fork center bolt.
Remove the center bolt and sealing washer.
Remove the following items using the same procedure as
the right fork disassembly (page 5-3):
– Dust seal
– Stop ring
– Fork tube, desclavando el buje guía sobre la botella de
la horquilla.
(1) CILINDER ASSY
(2) CENTER BOLT
(1) FORK BOLT
(2) DISTANCE COLLAR
(3) SPRING SEAT
(4) FORK SPRING
(5) TAPERED BUSHING
(6) FORK TUBE
Left Fork Disassembly
Before disassembling the fork, clean the entire sliding
surface and the bottom of the fork slider.
Be careful not to scratch the fork tube.
A scratched fork tube will damage the seal, causing an
oil leak.
The fork bolt under spring pressure.
Before removing the fork bolt, turn the pre-load adjuster
softest position.
Remove the fork bolt from the fork tube.
Remove the tapared bushing, distance collar, spring seat
and fork spring.
Pour out the fork fluid.
Install a new O-ring onto the fork bolt groove.
Screw the fork bolt on the lock nut from the damper rod
until it seats.
Hold the lock nut and tighten the fork bolt to the specified
torque.
Torque: 15 N•m (1.5 kgf•m)
Apply recommended fork fluid to the O-ring, then screw
the fork bolt into the fork tube.
Torque: 13 N•m (1.3 kgf•m)
(1) LOCK NUT
(2) NEW O-RING
(3) FORK BOLT
5-8
5-8
Frame servicing
2
1
3
2
1
4
3
2
1
5
6
2
3
1
Loading ...
Loading ...
Loading ...