Loading ...
Loading ...
Loading ...
8
Set Up Your System
The Power LED and Internet LED light green in about two minutes.
Your base station is set up.
Arlo Base Station LEDs
See the following list of explanations for green, amber, and blinking LEDs:
Get an Account
¾ To set up an Arlo account:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter https://my.arlo.com/#/login in the address bar
of a browser.
If you are using a mobile device that supports a Touch ID
®
fingerprint identity
sensor, you are prompted to enable Touch ID or skip.
SYNC
Ethernet
Reset
DC
Green
The base station
is powered on.
Blinking green
A firmware update
is in progress. DO
NOT TURN OFF THE
BASE STATION OR
CAMERAS.
O
The base station
is powered o.
Green
The base station
is connected to
the Internet.
Blinking green
The base station is
sending data over
the Internet.
Amber
The base station is
connected to the
router but did not
get an Internet
connection.
O
The base station is
not connected to
your router.
Green
Cameras are
connected to the
base station.
Blinking green
The base station
is attempting
to sync with a
camera.
Blinking amber
A camera is too
far from the base
station. Signal
strength is weak.
O
No cameras are
detected.
Amber
The base station
is booting.
Power Internet Camera
Loading ...
Loading ...
Loading ...