Loading ...
Loading ...
Loading ...
11
Set Up Your System
3. Wait for the sync status LED on the base station to light green.
4. Press the Sync button on top of the camera for about two seconds and then
release the button.
A blue LED on the camera blinks slowly when the sync process starts. The blue
LED blinks rapidly to confirm sync.
After the camera syncs, the Power LED on the base station might start blinking.
This indicates that the camera’s firmware is updating. For information about
firmware updates, see Arlo Camera Firmware Updates on page 12.
5. Repeat for each camera.
Arlo Camera LED
The LED on the camera lights when the camera is
powered on. The LED changes color and blinks depending
on the battery charge and to indicate the status of
activities such as syncing the camera and updating the
camera firmware.
See the following table for explanations for the LED.
Camera
LED
Color and Action Meaning
Solid blue The camera is powered on.
Fast blinking blue for 10
seconds
The camera synced to the base station.
Solid amber The camera is booting.
Blinking amber once per
minute
The battery charge is low (15% or less).
Fast blinking amber The camera failed to sync to the base station.
Blinking blue and amber A firmware update is in progress. DO NOT TURN OFF THE
CAMERA.
Loading ...
Loading ...
Loading ...