Loading ...
Loading ...
Loading ...
Valve Clearance
Servicing Your Honda 75
4. Install the cylinder head cover (2) and tighten
the cylinder head cover bolts (6) to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
(2) cylinder head cover
(6) cylinder head cover bolts
5. Connect the spark plug cap (7) and breather
tube (8).
(7) spark plug cap
(8) breather tube
6. Install the fuel tank and the seat (pages 33, 35).
(2)
(6)
(7)
(8)
(4) rubber seal (5) “UP” marks
(4)
(5)
(5)
(25) O-ring (new)
(26) crankshaft hole cap
(26)
(25)
Cylinder Head Cover Installation
1. Check that the spark plug hole packing (1) is
in good condition and replace it if necessary.
Apply engine oil to the spark plug hole
packing and install it to the cylinder head
cover (2).
2. Check that the cylinder head cover packing
(3) is in good condition and replace it if
necessary.
Install the cylinder head cover packing into
the cylinder head cover groove.
13. Install the spark plug (page 67).
14. Coat a new O-ring (25) with oil and install it
onto the crankshaft hole cap (26).
Apply grease to the crankshaft hole cap
threads.
Install and tighten the crankshaft hole cap to
the specified torque:
11 lbf·ft (15 N·m, 1.5 kgf·m)
(1) spark plug hole packing
(2) cylinder head cover
(3) cylinder head cover packing
3. Check the rubber seals (4) are in good
condition, replace them if necessary.
Install the rubber seals onto the cylinder head
cover with the “UP” marks (5) facing up.
(2)(3)
(1)
Loading ...
Loading ...
Loading ...