Loading ...
Loading ...
Loading ...
Valve Clearance
74 Servicing Your Honda
(14) camshaft holders
(17) camshaft holder bolts A
(18) camshaft holder bolts B
10. Install the condenser stay (22) and tighten the
condenser stay mounting bolt (23).
(24) feeler gauge
(14)
(14)
(18)
(17)
(24)
8. Remove the tensioner stopper (19) from the
cam chain tensioner lifter.
(19)
(19) tensioner stopper
9. Install a new sealing washer (20) and tighten
the cam chain tensioner lifter cover bolt (21).
(20) sealing washer
(21) cam chain tensioner lifter cover bolt
(21)
(20)
(16) identification marks
6. Install the camshaft holders (14) in their
proper position by aligning the camshaft
bearing grooves (15) with the set rings (13).
7. Apply oil to the camshaft holder bolt threads
and seating surface.
Tighten the camshaft holder bolts A (17) and
B (18) to the specified torque:
12 lbf·ft (16 N·m, 1.6 kgf·m)
Tighten the camshaft holder bolts in a criss-cross
pattern in two or three steps.
(16)
Each camshaft holder has an identification mark
(16).
(23)
(22)
(22) condenser stay
(23) condenser stay mounting bolts
11. Rotate the camshaft by rotating the crankshaft
clockwise several times.
12. Insert the feeler gauge (24) between the intake
valve lifter and cam.
If the feeler gauge cannot be inserted, the
shim is caught between the valve lifter and
the valve retainer. Remove the camshaft
holders, place the shim correctly, and reinstall
the camshaft holders.
Valve Clearances:
IN: 0.005 ± 0.001 in (0.12 ± 0.03 mm)
EX: 0.011 ± 0.001 in (0.28 ± 0.03 mm)
Loading ...
Loading ...
Loading ...