Loading ...
Loading ...
Loading ...
Servicing Your Honda 41
Fuel System
Fuel Pressure Relieving
1. Disconnect the fuel pump sub-harness
connector (1).
(1) fuel quick connect fitting cover
(2) fuel pump
(3) fuel quick connect fitting
5. Remove the bolt (4), clamp and setting rubber
(5).
(2)
(1)
Injector side: Fuel Pump side:
(3)
(1)
Fuel Line Replacement
Disconnection
1. Relieve the fuel pressure (this page).
2. Hang the fuel tank to the left side of the frame
(page 34).
3. Remove the fuel quick connect fitting cover
(1) from the fuel pump (2).
4. Check the fuel quick connect fitting (3) for
dirt, and clean if necessary.
(1) fuel pump sub-harness connector
2. Start the engine and let it idle until the engine
stalls.
(5)
(4)
6. Pull and release the joint rubber (6) of the
injector side from the retainer (7).
(6) joint rubber (injector side only)
(7) retainer
7. Place a shop towel (8) over the fuel quick
connect fitting.
(6)
(7)
(8) shop towel
Injector side: Fuel Pump side:
(8)
(cont’d)
(4) bolt (5) clamp and setting rubber
Loading ...
Loading ...
Loading ...