Loading ...
Loading ...
Loading ...
14
SAFETY FEATURES
Door lock
The door of your washer will lock once you touch and will stay locked until the
washer beeps at the end of the cycle, ensuring safety for you and your family while
yourwashing machine is operating.
Unlocking the door during the cycle
You can open the door to add or remove items during the wash simply by touching
the button.
IMPORTANT!
The door will remain locked if the temperature inside the washer is above 60°C and/
or the water level is above the bottom of the door seal (a warning will be displayed
in these circumstances, refer to ‘Before you call for service’).
To open the door
1
Touch to pause the washer.
– The door will automatically unlock if the conditions inside the washer are safe.
– The button and the time remaining will flash on the screen while the washer
ispaused.
2
Open the door to remove or add garments.
3
Close the door and touch to resume the cycle.
Opening the door during a power failure
If there is a power failure during a wash
cycle your washer will stop and the door
will remain locked. You can unlock the
washer door to remove your clothes by
opening thepump filter cover at the bottom
right of your washer. Simply place a coin or
key in the slot and tilt it upwards to lever
the cover open. Use a tool (ie key or screw
driver) to pull the door release tab down.
WARNING!
Do not attempt to do this if the water
level in the washer is above the bottom
of the door.
When power is restored, your washer will
resume its interrupted wash cycle.
Your washer also has the following protective measures:
Flood protection—turns off valves and turns pump on if a flood condition is detected.
Out-of-balance protection—stops and redistributes the load if an unbalanced load is
sensed, and/or slows the spin speed to compensate.
Excess suds protection—pauses to allow suds to break down before continuing the cycle.
Manual door opening mechanism
Manual door release tab
Loading ...
Loading ...
Loading ...