Loading ...
Loading ...
Loading ...
13
BEFORE YOUR FIRST WASH
Before you start, mark (
) accordingly if you have gone through
the checklist below:
1
Have the packaging and transit bolts been removed?
2
Is the drain hose threaded through the hose guide ‘Ubend’ (with no more
than 20mm extended) and hooked into your standpipe or tub, or attached
toa spigot?
3
Is the hot water hose connected to the hot valve (colour-coded orange)?
4
Is the cold water hose connected to the cold valve (colour-coded grey)?
5
Have the taps been turnedon?
6
Is the washer correctly levelled, feet are locked and cabinet corners clear
ofthe floor and walls?
7
Has the power cord been connected to an appropriate power supply
andthepower turned on?
8
Have you performed the installation test cycle? (see previous page)
IMPORTANT!
You must ensure all 4 transit bolts have been removed from your washer before
you start using it. If the transit bolts are not removed, they will damage your washer
and YOUR MANUFACTURER’S WARRANTY WILL BE COMPROMISED.
Loading ...
Loading ...
Loading ...