Loading ...
Loading ...
Loading ...
10
INSTALLATION INSTRUCTIONS
Draining
Placing the drain hose in a standpipe or tub
1
To guide the drain hose over the tub or
standpipe, the hose guide must be fitted to
the drain hose. The height of the standpipe
or tub should be between 600–1000mm.
2
Secure the hose guide so it cannot be
dislodged from the standpipe or tub.
IMPORTANT!
If the drain hose is placed on the ground or
if the standpipe or tub is less than 600mm
high, the washing machine will continuously
drain while being filled (siphon).
Regularly check that your standpipe or tub
is free from lint or other obstructions, which
may affect how your washer works or may
cause flooding.
Attaching drain hose to spigot
1
Guide the drain hose through the hose guide.
2
Secure the hose guide to the back wall of
cupboard using a screw. The height of the
drain hose should be between 600–1000mm
from ground level.
3
Attach the drain hose to the spigot and
secure using a hose clamp to ensure the
blanking insert is cleared from the spigot.
4
Check for leaks.
The drain hose should be checked from time
to time and replaced if any damage (egwear,
cuts, bulges, kinks, leaks, etc) is found.
Donotbend the drain hose sharply, as this
may cause it to split.
In multi-storey apartments or any upper
floor, the washer should be installed on a
floor equipped with a drain.
Draining must comply with local by-laws.
Fitting the drain hose guide
(20mm)
maximum
Standpipe 600 – 1000mm
Pull hose
through
guide
Attaching drain hose to spigot
Height 600 – 1000mm
from ground
Loading ...
Loading ...
Loading ...