Loading ...
Loading ...
Loading ...
5
First Things First
Attach the Hand Strap
Dropping a camera can cause serious damage both
internally and externally. So, to secure your investment,
attach the hand strap first thing, and use it every time.
1. Insert the small loop at the end of the strap under the
strap eyelet.
2. Insert the other end of the strap through the loop to tie
the strap onto the strap eyelet.
Power Supply
There are two ways to supply power to the camera; either use two batteries (size
AA) or supply power through a USB connection to the computer.
Notes: If you use the RS-232C Digital Cable to connect the camera to the computer
through a serial port, you must use the batteries to supply power to the camera. You can
also use an optional AC adapter (see Specifications section) to power the camera.
Inserting Batteries
1. On the bottom of the camera, slide the battery
chamber cover out in the direction of the large
arrow to open it. A click can be heard when the
compartment is released.
2. If necessary, remove the desiccant moisture
capsule from the battery compartment.
3. Insert two (2) AA batteries. Make sure to match the positive and negative ends
of the batteries to the markings inside the battery compartment.
4. Close the battery chamber cover by pushing down firmly and sliding it back
until the latch closes with a click.
Important Notes
• Never use manganese batteries.
• Your camera will not work if the batteries are inserted incorrectly.
• Remove batteries from camera if it will not be used for an extended
period of time.
• Never mix old batteries with new ones.
• Never mix batteries of different types.
• Never destroy batteries or dispose of by fire. Doing so can cause an
explosion or leak caustic materials into the environment.
Inserting the Hand Strap
Battery Compartment
Loading ...
Loading ...
Loading ...