Loading ...
Loading ...
Loading ...
9
Adjusting Settings
Changing Settings
To switch between recording mode ( )
and playback mode ( ), quickly press
and release the Menu button ( ) at the
lower right of the LCD screen until the
on-screen icon changes.
Pressing and holding the Menu button
enters the camera into a submenu level
in either playback or record modes.
Once at the submenu level, quickly
pressing the Menu button toggles
through available choices.
To choose an item, press the shutter
release button on top of the camera.
This acts as the “OK” selection.
Record Mode
Since pictures have to be taken and
stored before they can be viewed or
erased, let’s concentrate on different
ways to capture images.
Setting Image Quality
The digital camera can take two
different kinds of images; normal and
fine. Normal mode allows for a
minimum of 32 images at a resolution
of 640x480 pixels.
Normal mode uses a high compression
scheme which makes the images low in
file size, allowing you to take the most
pictures.
To set Normal picture quality:
1. Make sure the camera is in record
mode ( ).
2. Press and hold the Menu button( )
until you see a blinking “N.” This
represents Normal picture quality.
3. Press the shutter release button on
top of the camera to select “OK.”
The other option is to shoot pictures in
fine mode. While this option also uses a
resolution of 640x480 pixels, less file
compression is used meaning the
quality of the image is better. When the
camera is set to fine resolution, a
minimum of 16 images can be captured.
To set Fine picture quality:
1. Make sure the camera is in record
mode ( ).
2. Press and hold the Menu button
( ) until you see a blinking “N.”
Press the Menu button again, this
time quickly, and a blinking “F” will
be displayed on the LCD. This
represents fine picture quality mode.
3. Press the shutter release button on
top of the camera to select “OK”
and activate fine picture quality.
Note: The camera will remain in fine
quality mode until manually changed.
If the batteries are removed, it will
change back to the factory default
(Normal mode).
EV
+
–
NTSC
EV
+
0
•
1
A
ON/OFF
The buttons on the back of the camera allow you to change
from record to playback mode. These buttons also allow
changing how the camera records and displays pictures.
Loading ...
Loading ...
Loading ...