Loading ...
Loading ...
Loading ...
DescriptionSetting
The number of pings that the access point must send. The default number is 16.Ping Count
The size of each ping packet. The default size is 64 bytes.Packet Size (in Bytes)
The interval between pings. The default interval is 1 second.Ping Interval (in sec)
The period after which a ping times out. The default period is 60 seconds.Ping Timeout (in sec)
The IP address that the access point must ping.Remote Host
6. To start the ping test, click the Start button.
The results of the ping test display in the Ping Result field.
7.
To stop the ping test before the ping count is reached or if the ping times out, click
the Stop button.
Check the Internet speed
You can check the Internet speed of the access point. The results might be helpful if
you want to set bandwidth rate limits (see Set bandwidth rate limits for a WiFi network
on page 84).
To check the Internet speed:
1.
Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 46.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 31.
The Dashboard page displays.
User Manual218Diagnostics and
Troubleshooting
Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y
Loading ...
Loading ...
Loading ...