Netgear WAX610PA-100NAS User Manual

Loading ...

Table 2. LED descriptions outdoor model WAX610Y (Continued)

DescriptionColorLED Icon

Solid green. The 5 GHz WiFi radio is on but no clients are connected.5G WLAN LED

Solid blue. One or more WLAN clients are connected to the 5 GHz

WiFi radio.

Blinking blue. Traffic is detected on the 5 GHz WiFi radio.

Off. The 5 GHz WiFi radio is off.

Note: For information about troubleshooting with the LEDs, see Troubleshoot with the

LEDs on page 220.

Hardware interfaces outdoor model

WAX610Y

Use the latch on the front of the access point to open the cover. Carefully pull the latch

toward you and pull the cover downward so that it slides out of the enclosure. On the

bottom panel of the access point, the LAN/PoE+ port and Reset button are now

accessible.

Figure 5. Hardware interfaces outdoor model WAX610Y

Note: The access point does not provide a power connector, nor requires a power

adapter. You power up the access point only by connecting an Ethernet cable to a PoE+

switch.

User Manual21Hardware Overview Outdoor

Model WAX610Y

Insight Managed WiFi 6 AX1800 Dual Band Access Point Models WAX610 and WAX610Y

Loading ...

Netgear ‎WAX610PA-100NAS Wireless Access Point (WAX610PA) - WiFi 6 Dual-Band AX1800 Speed | Up to 250 Devices | 1 x 2.5G Ethernet LAN Port | 802.11ax | Insight Remote Management | PoE+ or Included Power Adapter