Loading ...
Loading ...
Loading ...
©2017 Pinnacle Climate Technologies 27 Vent-Free Gas Log Heater User Manual
Remote Control Operation (cont.)
Fig. 35—Setting Temperature Units
LCD Screen (see Fig. 34):
1. DISPLAY Indicates CURRENT room temperature.
2. °F OR °C Indicates degrees Fahrenheit or Celsius.
3. FLAME Indicates burner/valve in operation.
4. ROOM Indicates remote is in THERMO operation.
5. TEMP Appears during manual operation.
6. SET Appears when setting the desired
temperature in the thermo operation.
Setting °F / °C Scale (see Fig. 35):
The factory setting for temperature is °F. You can
change this setting to °C by pressing the “ON” key
and the “OFF” key at the same time. Follow this same
procedure to change from °C to °F.
Manual Function (see Fig. 36):
To operate the remote system in the MANUAL MODE,
do the following:
ON OPERATION
Press the “ON” key and the heater ame comes on.
During this time, the LCD screen shows “ON.” After three
(3) seconds, the LCD screen defaults to display the
room temperature, and the word “TEMP” shows on the
screen. The ame icon also appears on LCD screen in
the MANUAL MODE.
OFF OPERATION
Press the “OFF” key and the heater ame shuts o.
During this time, the LCD screen shows “OFF.” After
three (3) seconds, the LCD screen defaults to display the
room temperature and the word “TEMP” shows on the
screen.
ROOM TEMP
SET
TEMP
1
4
2
3
5
6
ROOM TEMP
SET
TEMP
TEMP
TEMP
Screen while
pressing the
ON key
Screen while
pressing the
OFF key
Screen after
the 3-Second
Default
Screen after
the 3-Second
Default
Fig. 36—Manual Function
Fig. 34—LCD Screen
Loading ...
Loading ...
Loading ...