Loading ...
Loading ...
Loading ...
©2017 Pinnacle Climate Technologies 20 Vent-Free Gas Log Heater User Manual
Log Placement— REM-L180ALT-F / REM-L180ANT-F / REM-L240ALT-F / REM-L240ANT-F
Failure to position the parts in accordance with these diagrams or failure to use only parts
specically approved with this heater may result in property damage or personal injury.
WARNING
Check to ensure that no yellow ame comes in contact with any log, both after installation
and periodically afterwards. Set the heater to HIGH and check if yellow ames come into
contact with any log. If so, reposition the logs as indicated in the below illustrations. Yellow ames coming into
contact with logs create unnecessary soot.
CAUTION
Install the logs exactly as indicated (see Fig.
17–21). Do not modify the logs, and use only
logs supplied with the heater. The logs are
numbered and correspond to the numbers
listed below.
REM-L180ALT-F /
REM-L180ANT-F
Number of Logs: 7
1. Place log #1 onto the pins in
the front grate base.
2. Place log #2 onto the middle
grate base, making sure it’s
aligned with log #1.
3. Place log #3 onto the back
grate base, making sure it’s
aligned with logs #1 and 2.
4. Place logs #4 and 5 so that
each log is resting on one end of
logs #2 and 3.
5a. Place log #6 so it’s resting on
logs #1, 2, and 3. Place log #7 so
it’s resting on logs #1 and 2.
Fig. 17
Fig. 21a— REM-L180ALT-F /
REM-L180ANT-F
Fig. 20
Fig. 19Fig. 18
REM-L240ALT-F /
REM-L240ANT-F
Number of Logs: 7
5b. Place log #6 so it’s resting
on logs #1and 2. Place log #7 so
it’s resting on logs #1, 2, and 3.
Fig. 21b— REM-L240ALT-F /
REM-L240ANT-F
Loading ...
Loading ...
Loading ...