Loading ...
Loading ...
Loading ...
©2017 Pinnacle Climate Technologies 14 Vent-Free Gas Log Heater User Manual
FLOOR CLEARANCES
In addition to meeting noncombustible material clearances, you must also meet required clearances between
replace opening and mantel shelf. A replace hood must be used if you do not meet the below clearances.
A. If installing the heater on oor level, you must maintain the minimum distance of 5" to combustibles (see
Fig. 7).
B. If combustible materials are less than 5" to the replace, you must install the heater at least 5" above the
combustible ooring (see Fig. 8).
Installation (cont.)
Combustible
Material
Non-Combustible
Material
5"
Min.
Fig. 7—Minimum Fireplace
Clearances if Installed at Floor Level
Combustible
Material
Hearth
5 in.
Min.
Fig. 8—Minimum Fireplace
Clearances above Combustible Flooring
Damper
Damper Clamp
Damper
“Opened
Position”
Fig. 9—Attach Damper to Fireplace
INSTALLING DAMPER CLAMP ACCESSORY FOR VENTED OPERATION
NOTE: When used as a vented heater, the heater must be installed only in a solid-fuel burning replace
with a working ue constructed of noncombustible material. You may use this heater as a vented product.
When used as a vented decorative appliance, use of the thermostat function is prohibited—operate
manually only. There are three reasons for operating your heater as a vented model:
1. The replace does not meet the clearance requirements for vent-free operation.
2. State or local codes do not permit vent-free operation.
3. You prefer vented operation.
Loading ...
Loading ...
Loading ...