Loading ...
Loading ...
Loading ...
Key Operation
2 or MEN Skip message (during playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
8 Turn answering system on
MPAUSEN
Pause message
*2
9 or
MSTOPN
Stop playback
0 Turn answering system off
*4
*3
Erase currently playing message
*5 Erase all messages
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 To resume playback:
MbN: “Playback” a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: “Erase” a MSELECTN
a MbN: “Yes” a MSELECTN
Calling back (Caller ID subscribers only)
Press the desired landline key (ML1N or ML2N)
during playback.
n Editing the number before calling back
1 Press MPAUSEN during playback.
2 MbN: “Edit & Call” a MSELECTN
3 Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 55).
4 M
N
R The unit automatically uses the line you set
in line selection mode (page 18) to call
back. When the line selection mode is set to
“Auto”, the indicated line (
or ) is used
for the call. If the indicated line is already
being used or you want to select the other
line, press ML1N or ML2N.
R To call back using a cellular line, continue
from step 2, “Making cellular calls”, page 23.
Erasing all messages
1 For line 1: MMENUN#3251
For line 2: MMENUN#3252
2 MbN: “Yes” a MSELECTN a MOFFN
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to inform
you of a new message arrival when new
messages are recorded. The base unit beeps 2
times every minute until you listen to the
messages, if the “Base unit beep” setting is
turned on. The default setting is “Off”.
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 For line 1: MMENUN#3391
For line 2: MMENUN#3392
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
New message alert by a call
This feature allows you to receive a notification by
phone when new messages are recorded. The
base unit calls a phone number you specify. You
can then operate the answering system remotely
to listen to the new message.
To use this feature, you must:
– store a phone number to which the unit makes
the call to.
– turn on the new message alert setting.
After you answer the new message alert call, you
can listen to messages from that call (page 66).
This feature can be set for each line separately.
Important:
R A new message alert is stopped 1 minute after
the unit starts to call. The unit will not retry the
call even if the call is not answered.
Storing a phone number to which the unit
makes an alert call
Handset
n From the phonebook:
1 For line 1: MMENUN#3381
For line 2: MMENUN#3382
64
For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
TG958x_0704_ver031.pdf 64 2014/07/04 10:32:28
Loading ...
Loading ...
Loading ...