Loading ...
Loading ...
Loading ...
“Telephone Plug-in” settings
By installing the “Telephone Plug-in” software for
Microsoft
®
Office Outlook
®
found on the supplied
CD-ROM and connecting the base unit and your
computer with the mini USB cable, the following
features are available:
– You can make/answer landline or cellular calls
from the “Telephone Plug-in” of Microsoft Office
Outlook through the base unit.
– Caller information is shown in a pop-up window
on your computer display when a call is
received.
System requirements
Item Specifications
CPU
1.0 GHz Intel
®
Pentium
®
/Celeron
®
processor or comparable CPU or
higher processor
RAM 512 MB or more
OS
R Microsoft
®
Windows Vista
®
or
later
R Microsoft
®
Windows
®
7 or later
R Microsoft
®
Windows
®
8 or later
Microsoft
®
Office
Outlook
®
R Microsoft
®
Office Outlook
®
2007
or later
R Microsoft
®
Office Outlook
®
2010
or later
R Microsoft
®
Office Outlook
®
2013
or later
Hard disk 20 MB or more
Video
resolution
1,024 x 768 or higher
Others R CD-ROM drive
R USB 2.0
Note:
R The screen shot shown is for Microsoft Office
Outlook 2013.
R The screen shots shown in these instructions
may differ slightly from those of the actual
product.
R Software features and appearance are subject
to change without notice.
Installing the “Telephone Plug-in”
Before installing “Telephone Plug-in”, make sure of
the following:
– Microsoft Office Outlook is installed on your
computer.
– The base unit is not connected to your computer
with the mini USB cable (until instructed to do
so).
1 Start Windows and exit all other applications.
R You must be logged in as an administrator
in order to install “Telephone Plug-in”.
2 Insert the included CD-ROM into your
CD-ROM drive.
R Click [Setup.exe] when prompted. If the
installation does not start, see page 77.
3 When the language selection window is
displayed, select the desired language and
click [Next].
4 When the “Telephone Plug-in” window is
displayed, click [Next].
5 Read the license agreement carefully.
If you accept the terms of the license
agreement, check the box and click [Next].
6 When the “Telephone Plug-in” install shield
wizard is displayed, click [Install].
7 When installation is finished, click [Finish] to
complete the installation. Then remove the
CD-ROM from your CD-ROM drive.
Uninstalling the “Telephone Plug-in”
1 Exit all applications and disconnect the mini
USB cable from your computer.
2 To uninstall “Telephone Plug-in”, perform the
following procedure:
From the Start menu:
32
For assistance, please visit http://www.panasonic.com/help
Call from Outlook® (Telephone Plug-in)
TG958x_0704_ver031.pdf 32 2014/07/04 10:32:26
Loading ...
Loading ...
Loading ...