Loading ...
Loading ...
Loading ...
Fuses and bulbs
Complete operations only in the sequence
giv
en:
Dipped beam and main beam headlights Fig. 84
A
1. Open the bonnet
››› page 186.
2.
Remove the bulb connector H4. Remove the rub-
ber cover using the tabs.
Press the retaining clip ››› Fig. 85
D
downwards
in the direction of the arrow, unclip sideways, and
remove it.
3.
Remove the bulb from the holder. If necessary,
press the lock on the bulb holder.
4. Replace the faulty bulb with a new identical bulb.
5.
Insert the bulb, return it to its position and insert
the retaining clip ››› Fig. 85
D
6.
Place the rubber cover and check that is in the
correct position. Insert the connector to the bulb
H4.
Side light and daytime lights Fig. 84
B
/
Front turn indicator Fig. 84
C
1. Open the bonnet
››› page 186.
2.
Turn the bulb holder in an anticlockwise direction
as far as it will go and remove it, along with the
bulb, pulling backwards.
3.
Remove the bulb from the holder. If necessary,
press the lock on the bulb holder.
4. Replace the faulty bulb with a new identical bulb.
Side light and daytime lights Fig. 84
B
/
Front turn indicator Fig. 84
C
5.
Insert the bulb holder in the headlight and turn it
clockwise as far as the stop.
Note
The images show the left hand headlight
from behind. The s
tructure of the right hand
side headlight is symmetric.
Replacing the front bumper bulbs
Fig. 86 In the front right wheel arch: Remove
the r
et
ainin
g screws (arrows) and take out the
expansive rivet
A
.
Fig. 87 Changing the bulbs in the headlights
Complete operations only in the sequence giv-
en:
1.
Unscrew the 2 retaining screws of the wheel arch
trim ››› Fig. 86 (arrows) with the screwdriver from
the vehicle took kit ››› page 70.
2.
Unscrew the expansive rivet in the lower front part
of the wheel arch trim
A
with the screwdriver
from the vehicle tool kit and completely remove it
››› page 70.
3. Carefully fold the wheel arch trim to the side.
4.
Release the connector ››› Fig. 87
1
and remove
it.
5.
Turn the bulb holder ››› Fig. 87 in the direction of
the arrow, in an anticlockwise direction as far as it
will go and remove it, along with the bulb, pulling
backwards.
6. Replace the faulty bulb with a new identical bulb.
»
81
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...