Loading ...
Loading ...
Loading ...
The essentials
●
O
b
ser
ve the manufacturer's instructions
when installing and removing the child seat
›››
in Safety instructions on page 66.
●
Unlock the seat backrest and fold it gently
f
or
w
ard ››› page 12.
●
Remove the head restraints situated be-
hind the child seat and store them safely in
the vehicle ›››
page 48.
●
Guide the upper retaining strap from of the
child seat back to the luggage compartment,
feeding it through the seat backrest and the
rear shelf.
●
Fold back the seat backrest and push it
firmly into the lock.
●
Secure the child seat to the lower anchor
points ››› page 18
●
Hook the upper retaining strap in the lug-
gage compartment, to the corresponding re-
taining ring ››› Fig. 27.
●
Tighten the strap so that the top of the
child seat rests on the seat backrest.
››› in Safety instructions on page 66
Starting the vehicle
Ignition loc
k
Fig. 28 Ignition key positions.
Switch ignition on: Place the key in the igni-
tion and s
t
ar
t the engine.
Locking and unlocking the steering wheel
●
Engaging the steering wheel lock: Remove
the key from the ignition and turn the wheel
until it locks. In vehicles with an automatic
gearbox, the gear lever must be in N position
in order to remove the key. If necessary,
press the locking key on the selector lever
and release it again.
●
Unlocking the steering wheel: Put the key
into the ignition and turn it at the same time
as the steering wheel in the direction indica-
ted by the arrow. If it is not possible to turn
the steering wheel, it may be because it is
locked.
Turning on/switching off the ignition, glow
plugs reheating
●
Switch ignition on: Turn the key to the
2
position.
●
Switch ignition off. Turn the key to the
1
position.
●
Diesel vehicles :
The glo
w p
lugs reheat
when the ignition is switched on
Starting the engine
●
Manual gearbox: press the clutch pedal all
the way down and move the gearbox lever in-
to neutral.
●
Automatic gearbox: step on the brake ped-
al and put the selector lever in N.
●
Turn the key to the
3
position. The key au-
t
om
atic
ally returns to the
2
position. Do not
pr
e
s
s the accelerator.
Start-Stop System*
When you stop and release the clutch pedal,
the Start-Stop system* turns off the engine.
The ignition remains switched on.
››› in Switching on the ignition and
starting the engine on page 135
››› page 135
20
Loading ...
Loading ...
Loading ...