Loading ...
Loading ...
Loading ...
The essentials
Tyres with compulsory direction of ro-
t
ation
A directional tread pattern can be identified
by the arr
ows on the sidewall that point in
the direction of rotation. Always observe the
direction of rotation indicated when fitting
the wheel to guarantee optimum properties
of this type of tyres with regard to grip,
noises, wear and aquaplaning.
If it is absolutely necessary to fit the spare
tyre* against the direction of rotation, drive
with care as this means the tyre does not of-
fer optimum driving properties. This is of par-
ticular importance when the road surface is
wet.
To return to directional tread tires, replace
the punctured tyre as soon as possible and
restore the obligatory direction of rotation of
all tyres.
After the wheel change
●
Clean the vehicle tools, if necessary and
p
ut
them a
way in the luggage compartment
foam holder
›››
page 70.
●
Store the spare wheel, the temporary spare
wheel or the changed wheel securely in the
luggage compartment.
●
Have the tightening torque of the wheel
bolts checked as soon as possible with a tor-
que wrench ››› page 38.
●
Have the flat tyre replaced as quickly as
possible.
Snow chains
Use
When using snow chains, applicable local
l
e
gi
slation and maximum permitted speed
limits must be observed.
In winter weather, snow chains not only help
to improve grip but also improve the braking
capacity.
The fitting of chains is permitted only on
front wheels and with the following combi-
nations of wheel trims and tyres:
Tyre size Wheel rim
165/70 R14
5 J x 14 offset of 35
175/65 R14
SEAT recommends you ask a technical serv-
ic
e f
or f
urther information on wheel, tyre and
chain sizes.
Wherever possible use fine-link chains meas-
uring less than 15 mm including the lock.
Remove wheel hub covers and trim rings be-
fore fitting snow chains ›››
. The wheel bolts
shou
l
d be c
overed with caps for safety rea-
sons. These are available from technical serv-
ices.
Temporary spare wheel
For technical reasons, snow chains must not
be used on the compact temporary spare
wheel ›››
page 206.
If it is necessary to fit chains with the tempo-
rary spare wheel in use, install the wheel on
the rear axle in the event of a fault in a front
wheel. Then, fit the rear wheel that is free, in-
stead of the damaged front wheel. In this sit-
uation, observe the rotating direction of the
wheels. SEAT recommends attaching the
snow chains before fitting the wheel.
WARNING
The use of unsuitable or incorrectly fitted
chain
s could lead to serious accidents and
damage.
●
Always the appropriate snow chains.
●
Observe the fitting instructions provided by
the snow chain manufacturer.
●
Never exceed the maximum permitted
speeds when driving with snow chains.
»
41
Loading ...
Loading ...
Loading ...