Loading ...
Loading ...
Loading ...
Lights and visibility
there are no changes in brightness, and not,
for ex
ample when it is foggy.
“Coming Home” and “Leaving Home”
function (e
xterior guidance lights)
“Coming Home” and “Leaving Home” Func-
tion lights up the clo
sest environment to the
vehicle when increasing and lowering the en-
vironment in case of darkness.
The “Coming Home” function should be con-
nected manually. The “Leaving Home” func-
tion is automatically controlled by a rain and
light sensor.
Activating the “Coming Home function”
●
Switch the ignition off.
●
Operate the headlight flashers for approxi-
mately
1 second ›››
page 21.
When the driver’s car door is opened, the
“Coming Home” lighting is connected. The
delay in disconnecting the headlights starts
when the last door or rear lid is closed.
Deactivating the “Coming Home function”
●
It is automatically disconnected once the
time set for the delay in disconnecting the
lights has lapsed.
●
OR: it is automatically disconnected if,
30 seconds after having activated the func-
tion, even if any vehicle door or the rear lid is
still open.
●
OR: turn the light switch to the position .
●
OR: connect the ignition.
Activating the “Leaving Home function”
●
Unlock the vehicle (the light switch has to
be in the position and the rain and light
sensor to detect darkness).
Deactivating the “Leaving Home function”
●
It is automatically disconnected once the
set time for the delay in disconnecting the
lights has lapsed.
●
OR: block the vehicle.
●
OR: turn the light switch to the position .
●
OR: connect the ignition.
Turn signal and main beam lever
Read the additional information carefully
›
›
›
page 21
Convenience turn signals
For the convenience turn signals, move the
lever as far as possible upwards or down-
wards and release the lever. The turn signal
will flash 3 times.
The convenience indicators can be deactiva-
ted at a Specialised workshop.
WARNING
Improper or lack of use of the turn signals, or
forg
etting to deactivate them can confuse
other road users. This could result in a seri-
ous accident.
●
Always give warning when you are going to
change lane, overtake or when turning, acti-
vating the turn signal in good time.
●
As soon as you have finished changing
lane, overtaking or turning, switch the turn
signal off.
WARNING
Incorrect use of the headlights may cause ac-
cidents
and serious injury, as the main beam
may distract or dazzle other drivers.
Note
●
If the con
venience turn signals are operat-
ing (three flashes) and the other convenience
turn signals are switched on, the active part
stops flashing and only flashes once in the
new part selected.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off ››› page 70.
●
If any of both turn signals fails, the warning
lamp will start flashing twice faster than nor-
mal.
»
105
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...