Loading ...
Loading ...
Loading ...
Be sure not to put anything on top of the
photo sensor
쎻
A
located on the top left-
hand side of the instrument panel. The
photo sensor controls the autolamp; if it is
covered, the photo sensor reacts as if it is
dark and the headlights will illuminate.
Headlight beam select
쎻
1
To select the low beam, put the lever in the
neutral position as shown.
쎻
2
To select the high beam, push the lever
forward while the switch is in the
po-
sition. Pull it back to select the low beam.
쎻
3
Pulling the lever toward you will flash the
headlight high beam.
Battery saver system
쐌 When the headlight switch is in the or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch has
been turned to the OFF position.
쐌 When the headlight switch remains in the
or position after the lights auto-
matically turn off, the lights will turn on for 5
minutes when the headlight switch is turned
to the OFF position and then turn to the
or position.
CAUTION
Even though the battery saver feature
automatically turns off the headlights
after a period of time, you should turn
the headlight switch to the OFF position
when the engine is not running to avoid
discharging the vehicle battery.
SIC2052 SIC2048
2-24 Instruments and controls
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...