Loading ...
Loading ...
Loading ...
If you touch “PREV” button during setup, the
setup will be canceled and/or the display will
return to the previous screen.
쐌 Finish setup.
If you touch this button after the setup is com-
pleted, the setup will start over, and the display
will return to the climate control or Audio mode,
and Navigation screen.
SETTING UP THE START-UP
SCREEN
When you turn the ignition switch to ACC, the
SYSTEM START-UP warning is displayed on
the screen. Read the warning and select the
“I AGREE” (English) or “ENTER” (Franc¸ ais) key
then push the “ENTER” button.
If you do not push the “ENTER” button, this
system will not proceed to the next step display.
If you do not touch the button or screen key for
more than 1 minute on the TRIP, SETTING or
START-UP screen, the screen will change to
TRIP screen automatically.
To proceed to the next step, refer to the separate
Navigation system Owner’s Manual.
HOW TO USE THE “TRIP” BUTTON
When the “TRIP” button is pushed, the following
models will display on the screen.
Warning message (if there are any) → TRIP 1
(Elapsed Time, Driving Distance, Average
Speed) → TRIP 2 → FUEL ECONOMY (Aver-
age Fuel Economy, Distance to Empty) →
MAINTENANCE (Engine Oil, Tire Rotation and
Tire Pressure — if so equipped).
Trip 1, trip 2 and fuel economy items
To reset the TRIP 1, TRIP 2 and FUEL
ECONOMY, select the “RESET” key using the
joystick and push the “ENTER” button or push
the “TRIP” button for more than approximately
1.5 seconds.
SAA0654
Display screen, heater, air conditioner and audio systems 4-9
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...