Loading ...
Loading ...
Loading ...
OPERATION WITH THE
MECHANICAL KEY AND VALET KEY
If the Intelligent Key cannot be used because its
battery is discharged, use the metal key to lock
or unlock the doors and use the mechanical key
or the valet key, which is registered to the
NISSAN Vehicle Immobilizer System compo-
nents, to start the engine.
Removing the mechanical key
쐌 Release the lock knob at the back of the
intelligent key and remove the mechanical
key.
쐌 To install the mechanical key to the intelligent
key, securely lock the lock knob and then
check that the mechanical key will not move.
CAUTION
Be sure to carry the Intelligent Key with
the mechanical key installed in it.
Locking/unlocking the doors with the
key (mechanical key and valet key)
The doors can be locked/unlocked by inserting
the mechanical and valet key into the key cylin-
der in the driver’s door in the same way as the
ordinary key.
Starting the engine with the
mechanical key and valet key
1. Securely depress the brake pedal.
2. Insert the mechanical key or the valet key into
the ignition switch.
3. Turn the ignition switch to the START posi-
tion and start the engine.
4. After starting the engine, release the switch.
For important safety information, see the “5.
Starting and driving” section.
Windows open/close with the
mechanical key
See “Opening and closing windows” on the
previous page.
FCC Notice:
This equipment has been tested and found
to comply with the limits for a Class B
digital device pursuant to part 15 of the
FCC Rules (the certification number).
These limits are designed to provide rea-
sonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications. However, there is
no guarantee that interference will not oc-
cur in a particular installation. If this equip-
ment does cause haumful interference to
radio or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving an-
tenna
— Increase the separation between the
SPA1951
Pre-driving checks and adjustments 3-23
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...