Loading ...
Loading ...
Loading ...
HOW TO USE “FUEL ECON”
BUTTON
The average fuel consumption (MPG or L/100
km) and the distance to empty (DTE — MI or km)
will appear on the screen when the “FUEL
ECON” button is pushed.
Average fuel consumption
(Mpg or L/100 km)
The average fuel consumption mode shows the
average fuel consumption since the last reset.
Resetting is done by pushing the “TRIP RESET”
or “FUEL ECON” button for more than approxi-
mately 1.5 seconds.
The display is updated every 30 seconds. At
about the first 30 seconds and 1/3 miles (500
m) after a reset or connecting battery cable, the
display will show (----).
Distance to empty (DTE — mile or
km)
The distance to empty (DTE) mode provides you
with an estimation of the distance that can be
driven before refueling. The DTE is constantly
being calculated, based on the amount of fuel in
the fuel tank and the actual fuel consumption.
The display is updated every 30 seconds.
When the fuel level is low, the DTE display will
change to (*).
NOTE:
쐌 The DTE reading may not change from
the previous reading if the amount of
fuel added is small.
쐌 Fuel moving in the tank while driving
may cause the reading to momentarily
change.
CLOCK
The digital clock displays time when the ignition
switch is in ACC or ON.
If the battery cable is disconnected, the
clock will not indicate the correct time.
Readjust the time.
Adjusting the time
To adjust the time, push the “H” or “M” button for
more than approximately 1.5 seconds. The time
indicator will flash.
Push the H button to adjust the hour.
Push the M button to adjust the minute.
To finish the adjusting, push the “PREV” button
or the screen will return to normal after 10
seconds.
HOW TO USE “E/M” BUTTON
You can change the unit as follows using the
“E/M” (English/Metric) button.
Unit: US — Mile, °F, MPG
Metric — km, °C, L/100 km
SAA0797
4-4 Display screen, heater, air conditioner and audio systems
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...