Loading ...
Loading ...
Loading ...
Front facing
If you must install a child restraint in the front
seat, follow these steps:
1. Position the child restraint on the front pas-
senger seat. It should be placed in a front
facing direction only. Move the seat to the
rearmost position. Adjust the head restraint to
its highest position. Always follow the child
restraint manufacturer’s instructions. Child
restraints for infants must be used in
the rear facing direction and therefore
must not be used in the front seat.
The back of the child restraint should be
secured against the vehicle seatback. If nec-
essary, adjust or remove the head restraint to
obtain the correct child restraint fit. See
“Head restraint adjustment” earlier in this
section. If the head restraint is removed, store
it in a secure place. Be sure to install the
head restraint when the child restraint is
removed. If the seating position does not
have an adjustable head restraint and it is
interfering with the proper child restraint fit,
try another seating position or a different
child restraint.
2. Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s in-
structions for belt routing.
SSS0301B SSS0360
1-32 Safety — seats, seat belts and supplemental restraint system
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...