Loading ...
Loading ...
Loading ...
the chain manufacturer’s suggestions. Use
only SAE Class S chains. Class “S” chains
are used on vehicles with restricted tire to
vehicle clearance. Vehicles that can use
Class “S” chains are designed to meet the
SAE standard minimum clearances between
the tire and the closest vehicle suspension or
body component required to accommodate
the use of a winter traction device (tire chains
or cables). The minimum clearances are de-
termined using the factory equipped tire size.
Other types may damage your vehicle. Use
chain tensioners when recommended by the
tire chain manufacturer to ensure a tight fit.
Loose end links of the tire chain must be
secured or removed to prevent the possibility
of whipping action damage to the fenders or
underbody. If possible, avoid fully loading
your vehicle when using tire chains. In addi-
tion, drive at a reduced speed. Otherwise,
your vehicle may be damaged and/or vehicle
handling and performance may be adversely
affected.
쐌 Never install tire chains on TEMPO-
RARY USE ONLY spare tires.
쐌 Do not use tire chains on dry roads.
Tire chains must be installed only on the
front wheels and not on the rear wheels.
Do not drive with tire chains on paved roads
which are clear of snow. Driving with chains in
such conditions can cause damage to the vari-
ous mechanisms of the vehicle due to some
overstress.
4. For all wheel drive:
If you install snow tires, they must also be the
same size, brand, construction and tread
pattern on all four wheels.
SPECIAL WINTER EQUIPMENT
It is recommended that the following items be
carried in the vehicle during winter:
쐌 a scraper and stiff-bristled brush to remove
ice and snow from the windows and wiper
blades.
쐌 a sturdy, flat board to be placed under the
jack to give it firm support.
쐌 a shovel to dig the vehicle out of snow-drifts.
쐌 extra window washer fluid to refill the reser-
voir tank.
DRIVING ON SNOW OR ICE
WARNING
쐌 Wet ice (32°F, 0°C and freezing rain),
very cold snow or ice can be slick and
very hard to drive on. The vehicle will
have much less traction or “grip” un-
der these conditions. Try to avoid
driving on wet ice until the road is
salted or sanded.
쐌 Whatever the condition, drive with
caution. Accelerate and slow down
with care. If accelerating or down-
shifting too fast, the drive wheels will
lose even more traction.
쐌 Allow more stopping distance under
these conditions. Braking should be
started sooner than on dry pavement.
쐌 Allow greater following distances on
slippery roads.
쐌 Watch for slippery spots (glare ice).
These may appear on an otherwise
clear road in shaded areas. If a patch
of ice is seen ahead, brake before
reaching it. Try not to brake while on
the ice, and avoid any sudden steer-
ing maneuvers.
5-34 Starting and driving
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...