Loading ...
Loading ...
Loading ...
Reclining
Pull the reclining strap
쎻
1
and position the seat
back at the desired angle
쎻
2
. Release the
reclining strap
쎻
1
after positioning the seat at
the desired angle.
The reclining feature allows adjustment of the
seatback for occupants of different sizes to help
obtain proper seat belt fit. (See “Precautions on
seat belt usage” later in this section.) The seat-
back may also be reclined to allow occupants to
rest when the vehicle is parked.
WARNING
쐌 Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and re-
ceive neck or other serious injuries.
You could also slide under the lap
belt and receive serious internal inju-
ries.
쐌 For the most effective protection
when the vehicle is in motion, the
seat should be upright. Always sit
well back in the seat and adjust the
seat belt properly. See “Precautions
on seat belt usage” later in this sec-
tion.
쐌 After adjustment, check to be sure
the seat is securely locked.
HEAD RESTRAINT ADJUSTMENT
To raise the head restraint, just pull it up.
To lower, push the lock knob
쎻
1
and push the
head restraint down.
To tilt the head restraint
쎻
2
, push it in the
direction required (if so equipped).
To remove the head restraint when folding down
the rear seat or using certain child restraints,
push the lock knob
쎻
1
and pull the head
restraint out.
SSS0227 SSS0228A
Safety — seats, seat belts and supplemental restraint system 1-7
墌 05.4.8/Z50-D/V5.0 墍
Loading ...
Loading ...
Loading ...